Skip to content
Skanyx

Best App for Vgate OBD2 (2026)

Full compatibilityGeneric ELM327

Vgate is the Shenzhen-based ELM327-compatible adapter manufacturer behind the iCar Pro and vLinker product lines, all of which work with Skanyx at full feature parity. The iCar Pro 2S is the dual-mode Classic Bluetooth + BLE adapter aimed at general use (35-50 EUR), the iCar Pro BLE 4.0 is the compact BLE budget adapter for iPhone and Android (30-45 EUR), and the vLinker MC+ and BM+ models are the firmware-improved premium tier (40-60 EUR) that come closer to OBDLink reliability at half the price, with the vLinker BM+ tuned for BimmerCode and BimmerLink on CAN-based BMWs (E90 2005+, F-series, G-series). Vgate hardware is hardware-agnostic on the diagnostic side and integrates cleanly with Skanyx for fault codes, freeze frame, live data, the 8-step Pre-Purchase Inspection, AI Chat, and Health Monitor.

Device price€20-€60
OngoingNo subscription
First year€25-€60
PlatformsiOS + Android + Windows

Does Vgate work with Skanyx?

What works with Skanyx:

  • Read and clear OBD2 fault codes (P0xxx, P2xxx generic) with freeze frame data
  • Read standard OBD2 live data PIDs (Mode 01) at consumer-grade polling rates
  • Read VIN (Mode 09) and Skanyx vehicle-database lookup against approximately 17,000 configs
  • Read on-board monitoring test results (Mode 06)
  • Full 8-step Pre-Purchase Inspection workflow including idle 90s and cruise 60s phases
  • AI Chat, Health Monitor, Fault Prediction, photo analysis, NHTSA recall lookup

What doesn't work with Skanyx (use a brand-specific tool instead):

  • Manufacturer-specific coding on BMW, VAG, Mercedes, or any brand
  • Bidirectional control (DPF forced regen, EPB service, throttle relearn, ABS bleed, AdBlue injector test)
  • Mode $22 manufacturer-extended PIDs (DPF regen count, AdBlue dosing rate, NOx delta, Haldex coupling temperature)
  • EV battery management data on Tesla, BMW i3/i4/iX, Nissan Leaf, Polestar, VW ID series
  • Higher-than-standard polling rates on the iCar Pro models (vLinker MC+/BM+ poll faster but still below OBDLink level)

Vgate does not sell a coding app, the company's only first-party software is Vgate Scan for basic diagnostics. For coding, pair the same Vgate adapter (especially vLinker MC+) with BimmerCode for BMW, OBDeleven PRO for VAG, or Carly for multi-brand. The hardware is hardware-agnostic.

Best Vgate model for Skanyx pairing: vLinker MC+ for the best Vgate Skanyx pairing on either iOS or Android, vLinker BM+ if you also run BimmerCode or BimmerLink on a CAN-based BMW (E90 2005+, F or G series), Vgate iCar Pro 2S as the cheapest credible dual-mode option.

Vgate adapter models and prices

  • Vgate iCar Pro 2S (€35-€50): Dual-mode Classic Bluetooth + BLE, full iOS and Android compatibility. Cheapest credible dual-mode Vgate model.
  • Vgate iCar Pro BT3.0 (€20-€35): Classic Bluetooth, Android only. The budget wired-in Vgate option for Skanyx pairing on Android phones.
  • Vgate vLinker MC+ (€40-€60): Premium tier with improved firmware, sits between Veepeak and OBDLink MX+ on quality. The recommended Vgate pick for daily Skanyx use.
  • Vgate vLinker BM+ (€40-€60): BMW-oriented vLinker variant tuned for BimmerCode and BimmerLink on CAN-based BMWs (E90 2005+, F-series, G-series). Pre-2005 E36/E46 use K-line/DS2 and need a K+DCAN cable with INPA, not this adapter.
  • Vgate iCar Pro BLE 4.0 (€30-€45): BLE, iOS and Android. Smaller form factor than the 2S, suited to permanent in-port installation and iPhone use.

Supported OBD2 protocols

  • ISO 9141-2
  • ISO 14230-4 (KWP2000)
  • ISO 15765-4 (CAN)
  • SAE J1850 VPW
  • SAE J1850 PWM

Vgate pros and cons

Pros:

  • Wide product range covers budget (iCar Pro BT3.0 at 20 EUR) through premium (vLinker MC+ at 60 EUR)
  • vLinker MC+ delivers approximately 70 percent of OBDLink MX+ reliability at half the price
  • vLinker BM+ is tuned for BimmerCode and BimmerLink coding on CAN-based BMWs (E90 2005+, F and G series)
  • Dual-mode Bluetooth + BLE on the iCar Pro 2S supports both iOS and Android
  • No subscription, no vendor lock-in, hardware-agnostic with Skanyx and other ELM327 apps
  • Available on Amazon EU and AliExpress with EU warehouse shipping

Cons:

  • Polling rate on the iCar Pro models slower than OBDLink, less suitable for transient faults
  • Firmware varies between batches, some 2023-stock units have CAN protocol bugs that 2024+ units fixed
  • No coding or bidirectional control regardless of model
  • Build quality below OBDLink standard, plastic feels less robust
  • Tesla and EV battery diagnostics out of reach, same limit as any generic adapter

What is Vgate best for?

  • Mid-budget Skanyx users wanting better-than-Veepeak quality without paying OBDLink prices
  • BMW owners running BimmerCode or BimmerLink on a CAN-based BMW (E90 2005+, F or G series) via the vLinker BM+
  • Multi-brand households running BimmerCode and Skanyx on the same vLinker BM+ adapter
  • Used-car buyers running 8-step Pre-Purchase Inspections on 5,000-20,000 EUR vehicles

When NOT to choose Vgate

  • Workshop daily-driver use, OBDLink MX+ has more reliable Bluetooth at scale
  • Tesla, BMW i3/i4/iX, Nissan Leaf owners chasing battery SOH data
  • Owners needing brand-specific coding via Vgate hardware alone, pair with BimmerCode or OBDeleven instead
  • Anyone needing DPF forced regen or EPB service

Vgate alternatives

  • OBDLink MX+ (100-145 EUR) - reliability upgrade if you scan weekly or run multi-vehicle PPI
  • Veepeak OBDCheck BLE (30-50 EUR) - cheaper but slightly lower build quality
  • OBDeleven 3 adapter - falls back to generic ELM327 in Skanyx, doubles as VAG coding tool
  • vLinker BM+ - the BMW-oriented model for BimmerCode and BimmerLink coding
  • Carista BLE adapter - if you want light coding alongside Skanyx diagnostics

Vgate availability by country

Germany

Vgate iCar Pro 2S and vLinker MC+ widely stocked on Amazon.de, Autodoc.de, and kfzteile24.de. Motor-Talk.de has active BMW coding communities where BimmerCode-compatible adapters like the vLinker BM+ are commonly used on CAN-based E90, F and G-series BMWs.

Poland

Allegro.pl lists Vgate adapters around 110-250 PLN. iParts.pl stocks the full lineup. Polish independent VW workshops sometimes pick vLinker MC+ over OBDLink for cost-conscious diagnostic work, the BM+ is popular for BMW pre-purchase checks on otomoto.pl listings.

Lithuania

Available on Varle.lt and direct AliExpress imports with 2-3 week shipping. The cost-conscious Lithuanian used-car market favours iCar Pro 2S over OBDLink MX+ for first Skanyx pairings on 3,000-12,000 EUR vehicles from autoplius.lt.

United Kingdom

Amazon UK lists iCar Pro 2S at 35-50 GBP. vLinker MC+ around 45-60 GBP. The BM+ is a common BimmerCode-compatible pick in UK BMW communities for coding CAN-based BMWs (E90 2005+, F and G series).

Spain

Amazon.es is the primary channel. The BLE-capable iCar Pro 2S and vLinker MC+ suit the iPhone-dominant Spanish market. ForoCoches threads on Vgate adapters for pre-ITV inspection screening are widely cited.

Frequently asked questions about Vgate

Does Vgate work with Skanyx?

Yes, the entire Vgate lineup (iCar Pro BT3.0, iCar Pro BLE 4.0, iCar Pro 2S, vLinker MC+, vLinker BM+) works with Skanyx at full feature parity for fault codes, freeze frame, standard live data, the 8-step Pre-Purchase Inspection, AI Chat, Health Monitor, and Fault Prediction. vLinker MC+ is the recommended Skanyx pairing across the Vgate range.

Vgate iCar Pro vs vLinker MC+, which is better?

vLinker MC+ has improved firmware, faster polling, and tighter Bluetooth stability than the iCar Pro 2S. Pay the 10-15 EUR premium for vLinker MC+ if you run weekly PPI scans or chase transient faults. Save the money on iCar Pro 2S if you scan occasionally for check-engine lights.

Which Vgate adapter is best for an older BMW?

The vLinker BM+ (40-60 EUR) is the Vgate pick for BimmerCode and BimmerLink on CAN-based BMWs (E90 2005+, F-series, G-series); it also pairs with Skanyx for diagnostics. Pre-2005 E36 and E46 are different: BimmerCode does not support them, and they need a K+DCAN cable with INPA or NCS Expert on Windows. For general non-BMW use, the iCar Pro BLE 4.0 or iCar Pro 2S is the cheaper choice.

Vgate price 2026

iCar Pro BT3.0 is 20-35 EUR, iCar Pro BLE 4.0 is 30-45 EUR, iCar Pro 2S is 35-50 EUR, vLinker MC+ is 40-60 EUR, vLinker BM+ is 40-60 EUR. No subscription. Stable EU pricing on Amazon DE, ES, IT, NL, UK. Polish Allegro adds 10-15 percent overhead.

Is Vgate worth it vs cheap AliExpress clones?

Yes for the vLinker line, marginally yes for iCar Pro, neutral for the iCar Pro BT3.0 versus the cheapest clones. vLinker MC+ has documented firmware improvements over generic v1.5 clones, you can verify by checking the adapter responds to ATSP0 protocol auto-detection on newer CAN-FD vehicles where cheap clones often fail.

Can Vgate do BMW or VAG coding?

No directly. Vgate hardware is ELM327-compatible and reads only standardized OBD2 protocols. The vLinker BM+ is tuned for BimmerCode and BimmerLink on CAN-based BMWs, but the coding capability comes from BimmerCode, not from Vgate. For VAG coding pair with OBDeleven or Carista alongside Skanyx for diagnostics.

Why does my Vgate adapter not pair with iPhone?

Check the model. Vgate iCar Pro 2S and iCar Pro BLE 4.0 use BLE and pair with iPhone. The iCar Pro BT3.0 uses Classic Bluetooth and is Android-only. If you bought a BT3.0 model and it does not show up in iOS Bluetooth settings, that is the cause, the model needs to be a 2S, a BLE 4.0, or a vLinker for iPhone compatibility.

Pair Vgate with Skanyx

Skanyx works with Vgate for standard OBD2 diagnostics. Free tier covers everything for casual diagnosis.

We'll only email you about the launch. Privacy Policy

Last updated: 2026-05-27